Torque Ground Rotational Trainer | Elite Fitness NZ

Torque Fitness was founded in 2005 by a team of experts in the fitness equipment industry whose experience designing and manufacturing award-winning innovative strength training systems stretch back to 1979. Torque’s mission is to provide the world’s best strength exercise equipment for people of all ages and activity levels who aspire to live stronger and play harder.


The Torque X-Rack Warrior Series Ground Rotation Trainer can be used on all of the X-Rack Systems (Warrior Wall Mount, Warrior Arsenal and Warrior Rig).


The Ground Rotation Trainer is perfect for an all over body workout with an emphasis on core strength. This accessory can be worked at any fitness level so you can customise it to your individual fitness needs. Use a traditional Olympic bar and plates for added resistance. Perform a vast amount of rotational exercises in addition to some whole body movements sure to build rock solid core strength and power.


1. Upright Design 

Some manufacturers boast the use of 7 gauge tubing for their uprights, which is only needed because the design eliminates one of the four corners where the majority of the strength resides.In contrast, the Torque design which uses 3” x 3” hot rolled and pickled 11 gauge steel, removes only material from one wall maintaining the structural integrity of the tubing. This also allows the increments between the adjustment points to be spaced closer together, with rack positions at every 3 inches. 




2. J-Hook Engagement 

Torque attachments feature a unique engagement method with the uprights. Two machined solid steel blocks fit into the square slot openings and drop into place being supported by the entire wall of the tubing. This prevents any twisting or rotating of the J-Hooks unlike other designs which can rotate freely in at least one direction.As an added safety feature, a spring pin is used to secure the J-hook down. Other than the weight of the J-hook itself, the spring pin is under no load. It’s sole purpose is to prevent the J-hook from coming out of its engagement position in the event that an athlete inadvertently hits the hook on the way up from a lift.



3. Paint/Olympic Bar Protection 

Torque attachments all utilize U.H.M.W pads that protect both the paint finish on the uprights, the inside and outside of the J-Hooks, and the Olympic bars used. Used in connection with the upright design, the only surface that has steel on steel contact is the bottom edge of the square cutout in the upright.




4. Thru-Plate™ Construction

All of Torque Pull-Up Crosses feature Thru-Plate™ fully welded construction. The pull-up bars go inside a hole and are supported by the thick wall of the connection plate. This puts less stress on the welds themselves and should a weld ever start to develop a crack, the bar is still fully supported.



5. Superior Finish and Grip

Torque X-Racks feature 5mm Storm grey wrinkle textured powder-coat paint. This electrostatic painting procedure follows numerous washing and pre-treatment cycles and ensures a durable long lasting surface. The combination of the specially designed powder compound and the extra-thick coverage provides an unmatched secure grip for pull-ups. Competitor models offer paint that is less than 2mm thick, scratches easily, and has a slippery surface.


6.  Design Verification & Testing

Theory is one thing, but Torque verifies those theories with computer aided stress analysis and extensive testing. All products are tested both statically and dynamically above the recommended ASTM and EN957 standards.In most cases, a product is first tested to the standard, then to double the standard and lastly the product is tested until failure (if possible).





7. X-Rack Boots

Where every other rack company is content with having a base plate that bolts to the ground with exposed bolt threads, Torque saw this as a problem that needed to be addressed. The X-Rack boot is molded out of high strength and resilient urethane, and is designed to cover the exposed bolts, prevent chalk and dust from collecting at the base and protects the uprights during vacuuming. 





  • X-Rack Warrior Series Accessory
  • Adaptable to Warrior Wall Mount, Warrior Arsenal and Warrior Rig
  • Residential Quality
  • Used on all of the X-Rack Warrior Systems

Curious to know what freight is to your area? Enter your postcode to find out the price for the above product.

Not sure of your postcode? Vist NZ Post for current postcode

Pickup options also available at Mt. Wellington, Auckland

For more information about shipping/pickup please visit our shipping page
Any more information please feel free to call us on 0800 243 834

Write Review